PC I/O Address
     <03EXh & 07EXh>, 02CXh & 06CXh, 02DXh & 06DXh, 02EXh & 06EXh 

PC Memory Address - Below 1MB
   The default PC memory address is 0xCC00. This 16 Kbyte block in PC  memory maps into two 8 Kbyte windows in the GPX memory space.  These 8 Kbyte windows can each be mapped to start at any 8 Kbyte boundary in the GPX memory space.  By using the system configuration utility 
to configure memory usage the user is assured of a non-conflicting selection.  If the PC memory address is configured as disabled the software you are using with the ARTIST 1000 MC Series graphic controllerwill use the default. 
     <CC00-CFFF>, C800-CBFF, D000-D3FF, D400-D7FF, D800-DBFF, DC00-DFFF, Disabled 

Data Bus Sizing
   The ARTIST 1000 MC Series graphic controller can be configured to operate in a 16 bit Micro Channel card slot or a 32 bit Micro Channelcard slot. 
     <32 Bits>, 16 Bits 

Interrupt Level
     The ARTIST 1000 MC Series graphic controller can be configured to use Interrupt 5, 7, 10, 11 or interrupts may be disabled 
     <Disabled>, IRQ 5, IRQ 7, IRQ 10, IRQ 11 

PC Memory Address - Above 1MB
     A PC memory address above 1MB should only be used for UNIX systems. The default is that decoding above 1MB is disabled 
     <Disabled>, 2MB - 4MB, 4MB - 6MB, 6MB - 8MB, 8MB - 10MB, 10MB - 12MB, 12MB - 14MB, 14MB - 16MB