| Error Code |
FRU/Action |
000095XX
(System complex failure) |
1. Memory Card
2. Bridge Card
3. Processor Card
4. System Board |
000113XX
(First memory card is missing or not operational.) |
1.Memory Card |
| 000114XX |
1. Any Adapter
2. System Board |
| 00016400 (Memory size changed) |
1. Memory Card |
| 00021700 (Multi-bit ECC error) |
1. Memory Card |
| 00024000, 000297XX |
1. Memory Card |
009503XX
009505XX
009506XX |
1. System Board
2. Processor Card
3. Bridge Card
4. Memory Card |
01290050 01290051
01290052 01290053
01290054 01290055
01290056 |
1. System Board
2. Bridge Card
3. Processor Card
4. Memory Card
5. Any PCI Card |
01296000
(Processor not supported) |
1. Replace the Processor Card |
| 0129910X (Adapter in slot
X has an invalid serial number) |
1. Replace adapter in indicated slot |
013010XX
(I2C failed to respond) |
1. System Board |
| 01300AXX (Slot LED problem) |
1. System Board |
01300BXX
(Display panel problem) |
1. Display Panel
2. Power Switch Panel
3. System Board |
0210XXXX
(Internal bus size unknown)
0210XXX1
(External bus size unknown) |
1. SCSI Hard Disk Drive
2. SCSI Adapter or system board SCSI .
3. SCSI Cable
4. SCSI ID Switch (on some models) |
| 026109XX (Display problem) |
1. Display |
026111XX
(Video adapter problem) |
1. Video Adapter |
02790XXX 02791XXX 02792XXX 02793XXX
027906XX 027907XX |
(Ethernet adapterPOST error)1. Check power and reseat adapter.
2. Ethernet PeerMaster ServerAdapter |
02799XXX
(Communications to PeerMaster failed or the adapter failed.) |
1. Run Setup and verify PeerMaster Server configuration.
2. Ethernet PeerMaster Adapter |
| 0279XXXX |
1. FWSR /A (FRU No. 06H3059)
2. System Board
3. Signal Pass Through Card (if installed) |
| 028309XX (Display problem) |
1. Display |
028310XX
(System board video problem) |
1. System Board |
028331XX
(System board video) |
1. System Board |